1. There is a mounting screw hole 3mm 2. Power Supply: DC 5V 3. With analog output 4. There are threshold level output flip 5. High sensitive microphone and high sensitivity. 6. A power indicator light 7. The comparator output is light
1.Step Angle 1.8° 2.Number of phase 2 3.Inductance resistance 100MΩmin(500V) 4.Rotor inertia 38g.cm2 5.Mass 0.2kg 6.Rated Voltage 12.8V 7.Rated Current 0.4A 8.Resistance per phase 32Ω±10% 9.Inductance per phase 37mH±20% 10.Holding Torque 220mN.m 11.Number of Lead wire 4 12Weight 150g/pc 13.Model Number 42SHD0503-20v2 14.Length 26mm
the maximum current of 2.5A. the maximum support 32 subdivision. 4 layer PCB board, better heat dissipation. the chip resistance is smaller, lower heat, better heat dissipation.
Signal input: single ended, pulse / direction Subdivision optional: 1/2/4/8/16/32 subdivision Output current: 0.5A-4.0A Input voltage: 9-42VDC ( Optimal： 12-30VDC ) The current is automatically halved at rest. TB6600 Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor Optocoupler isolated signal input, strong anti-interference ability, With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions Small size, easy to install External signal 3.3-24V universal, no series resistor required Operating Temperature: -10 to 45 Degrees Celsius Storage temperature: -40 to 70 Degrees Celsius Chopping Frequency: less than 50KHZ
Rating Voltage: 6A 250V AC / 10A 125V AC Terminals:3-Pin Type: ON-OFF ( SPDT ) Color: Red and Black Material: Plastic, Metal 3 Pin Terminals, On Off Snap In Rocker Switch
Max. current can reach 120A, applied to model, motor, electric adjustment, robot and industrial joint, and so on.
Input voltage: 3.3 ~ 5.5V Output signal: 0 ~ 2.3 v Working current: 3 ~ 6 A Signal adapter board: 4.2*3.2cm TDS probe length: 83cm TDS measuring range: 0~1000ppm TDS measuring accuracy: ±10% F.S.(25°C) Module interface: XH2.54-3P Electrode interface: XH2.54-2P