Showing 193–204 of 373 results

Show sidebar

Motor driver Shield VNH2SP30

LKR 1,590.00
Description16 v Voltage Max: Maximum current rating: 30 A Practical Continuous Current: 14 A The Current sensing available analog pin MOSFET on - hold: 19 m Ω (per legs) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown

Motor Driver Stepper A4988 Module for CNC Shield

LKR 280.00
Low RDS (On) Output Automatic current decay mode detection / selection Mix with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Cross-current protection 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground fault protection Load short-circuit protection Optional step five modes: full, 1/2, 1/4, 1/8 and 1/16

MP3 Format decoding audio Player

LKR 320.00
Features: * Superior sound quality.Onboard 2Wmonoamplifier(5V power of up to 3W) is directlyconnected to the speaker(recommendation 4O3Wspeakers),3.5mm gold plated headphone jackcan connect with headphones or external audio.

Multi Servo Tester

LKR 420.00
Output: ≤15 mA (5.0) Input: DC 4.2-6.0 V Output Signal: 1.5 ms ± 0.5 ms Size: approx. 46 X 32 X 17 mm/1.81 X 1.26 X 0.67 in Weight: approx. 8 g Adjustment Modes: manual, automatic, and the median.

Multifunctional expansion Starter kit board

LKR 390.00
Multifunctional expansion board kit based learning for arduino UNO r3 LENARDO mega 2560 Shield

Nano Terminal Adapter Expantion Board

LKR 240.00
This is a terminal adapter for the for arduino Nano. It lables for arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order). You can use this adapter to easily hook up for arduino Nano to an outside world via hook up wires. Board Size:5.2x3.5cm(approx)

Nano Terminal Adapter with DC Power Supply

LKR 290.00
AREF Output: 3.3V Expand all 6 PWM pins Expans I2C pins Compatible only with Arduino NANO Expand DC power interface Available pins: +3.3V, +5V, GND, I2C, RX/TX, All other IOs

Neodymium Magnet 5mm x 1mm

LKR 10.00
Operating temperature: =80°C . Magnets Type: Neodymium. Disc Size: 5mm x 1mm. Rating: N35

NodeMcu Development Board

LKR 750.00
01. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board. 02. Power your developement in the fastest way combinating with NodeMCU Firmware! 03. USB-TTL included, plug&play 04. 10 GPIO, every GPIO can be PWM, I2C, 1-wire 05. FCC CERTIFIED WI-FI module(Coming soon) 06. PCB antenna

NRF24L01 Base Module

LKR 120.00
Input Voltage: 5V DC Output Voltage: 1.9~3.6 DC Current: 12.3 mA Adapted for 8 Pin NRF24L01+ Module On-board AMS1117-3.3 chip Dimension: 26 x 19 x 12mm

OpenPilot CC3D Flight Controller

LKR 2,190.00
* OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport
* The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.
* 3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000