Features:
* 802.11 b / g / n
* Wi-Fi Direct (P2P), soft-AP
* Built-in TCP / IP protocol stack
* Built-in TR switch, balun, LNA, power amplifier and matching network
* Built-in PLL, voltage regulator and power management components
* 802.11b mode + 19.5dBm output power
* Built-in temperature sensor
* Support antenna diversity
* off leakage current is less than 10uA
Features:
* 802.11 b / g / n
* Wi-Fi Direct (P2P), soft-AP
* Built-in TCP / IP protocol stack
* Built-in TR switch, balun, LNA, power amplifier and matching network
* Built-in PLL, voltage regulator and power management components
* 802.11b mode + 19.5dBm output power
* Built-in temperature sensor
* Support antenna diversity
* off leakage current is less than 10uA
* Built-in low-power 32-bit CPU: can double as an application processor
* SDIO 2.0, SPI, UART
* STBC, 1×1 MIMO, 2×1 MIMO
* A-MPDU, A-MSDU aggregation and the 0.4 Within wake
* 2ms, connect and transfer data packets
* standby power consumption of less than 1.0mW (DTIM3)
Audio Input: Wireless Bluetooth
Max. Receiving Distance: 10 Meter
Power Output: Dual-channel 15 W+15 W
Applicable Speaker Impedance: 4/6/8/10 ohm
Supply Voltage: DC 10~25 V(recommended DC 12V More than 2A)
Description
With this Ethernet Shield, your Arduino board can be used to connect to internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
Controller: W5100.
This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
It is directly supported by Arduino official Ethernet Library.
Specification:
* Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
* GPRS multi-slot class 10/8
* GPRS mobile station class B
* Compliant to GSM phase 2/2+
* Class 4 (2 W 850 / 900 MHz)
* Class 1 (1 W 1800 / 1900MHz)
primary info
penetrating ability SI4432 IC, stable performance
Frequency Range: 433.92M
Sensitivity up to-121dBm
Maximum output power: 20dBm
Data transfer rate :0.123-256kbps
FSK, GFSK and OOK modulation mode
1.8-3.6 V power supply
Low consumption shutdown mode
Digital received signal strength indicator (RSSI)
Timing wake-up function
The antenna automatically match and two-way switch control
