Description:
* Total weight: 67g
* Gear Motor:
* Operating voltage: 3V ~ 12V DC (recommended value is 6 ~ 8V)
* Maximum torque: 800g.cm (3V)
* Speed without load: 170RMP (3V)
* Reduction ratio: 1:48
* Load current: 70mA (250mA MAX) (3V pm)
* With EMC, it has strong anti-interference ability and causes no interference to micro-controller.
* Center hole: 5.3MM x 3.66MM
* Diameter: 66MM
* Width: 2.66MM
Description:
* Total weight: 67g
* Gear Motor:
* Operating voltage: 3V ~ 12V DC (recommended value is 6 ~ 8V)
* Maximum torque: 800g.cm (3V)
* Speed without load: 170RMP (3V)
* Reduction ratio: 1:48
* Load current: 70mA (250mA MAX) (3V pm)
* With EMC, it has strong anti-interference ability and causes no interference to micro-controller.
* Center hole: 5.3MM x 3.66MM
* Diameter: 66MM
* Width: 2.66MM
These black plastic wheels are designed specifically for use with our FEETECH FS90R Servo. The wheels have silicone tires and measure 60 mm (2.36?) in diameter.Four additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.
Signal input: single ended, pulse / direction
Subdivision optional: 1/2/4/8/16/32 subdivision
Output current: 0.5A-4.0A
Input voltage: 9-42VDC ( Optimal： 12-30VDC )
The current is automatically halved at rest.
TB6600 Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor
Optocoupler isolated signal input, strong anti-interference ability,
With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions
Small size, easy to install
External signal 3.3-24V universal, no series resistor required
Operating Temperature: -10 to 45 Degrees Celsius
Storage temperature: -40 to 70 Degrees Celsius
Chopping Frequency: less than 50KHZ
01. Rated Voltage:DC 12 V
02. Speed : 100 RPM
03. Shaft Diameter : 3 mm
04. Size:Diameter: 12 mm
05. fuselage without shaft length: 26 mm
06. Output axial length: 10 MM to 4.4 MM
07. Name:DC Mini Metal Gear Motor.
08. Voltage range:6-12V
Size: 20*15*25
Axial length: 8 mm
Trunnion:2 mm
Reference current: 0.35 to 0.4 A
3 v speed: 17000-18000 revolutions per minute
This is a general motor suitable for small toy car, using 3V DC voltage.
