Characteristic parameter:
Mounting way: Screen shield type
Detection distance: 10mm±10%
Set distance: 0-8mm
Response frequency: 1 kHz
Delay distance: 10% below of the detection distance
Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
1. Can detect surrounding environment of the humidity and temperature
2. DHT11 sensor adopts
3. Humidity measurement range: 20% ~95%
4. Humidity measurement error: ±5%
5. Temperature measurement range: 0℃~50℃
6. Temperature measurement error: ±2 ℃
7. Operating voltage:3.3 V~5 V
8. Output form:digital
9. Has fixed bolt hole and easy installation
10. PCB Dimension: 32 mm * 14 mm
1. The current sensor chips: ACS712ELC-05B.
2. pin 5V power supply, on-board power indicator.
3. the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / A.
4. there is no the detection current through, the output voltage is VCC / 2.
5. PCB board size: 31 (mm) x13 (mm).
Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!
