Features:
1. Brushless, permanent magnetic rotor.
2. Super long working life(more than 30000 hours).
3. Adopt high performance ceramic shaft.
4. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems.
5. Amphibious design.
6. Submersible installation and entirely waterproof.
Features:
1. Brushless, permanent magnetic rotor.
2. Super long working life(more than 30000 hours).
3. Adopt high performance ceramic shaft.
4. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems.
5. Amphibious design.
6. Submersible installation and entirely waterproof.
7. low consumption.
8. low noise(less than35db).
9. Pump material: ABS.
10. Condition of use: continuously.
11. Fluids: Water, oil, gasoline, acid and alkali solution.
12. Working temperature: 0 ~ 75c.
13. Power consumption: 4.2W.
14. Rated voltage: 12V DC.
15. Max rated current: 350mA.
16. Max flow rate: 4L/MIN(1.06G/MIN).
17. Max Head(lift height): 3M.
18. Noise: <40dB(most 35dB).
19. Water proof class: IP68(can be submersible installed).
20. Life span: More than 30000hrs.
21. Power supply: Solar panel, DC electric source, battery.
22. Size: 5.5cm x 3.5cm x 4.5cm.
Features
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
Great for truck, Boat, Racing Car, Helicopter and Airplane.
Power Supply: Through External Adapter.
Stable and Shock Proof. - Coreless Motor - Metal Gear - Double Ball Bearing -
Connector Wire Length 300mm
Technical parameters:
Brand new and high quality.
Number of lines: 100 lines
Outer diameter: 22mm
Bore Diameter: 3.5mm
Thickness: 0.3mm
Material: Steel
Power supply voltage: VM = 15V max, VCC = 2.7\u20135.5V
Output current: Iout = 1.2A(average) / 3.2A (peak)
Standby control to save power
CW / CCW / short brake / stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply lines
Pre-soldered headers
Material: brass
Inner diameter: 2/4/5/6/7mm
Hexagon side length: 7mm
Diagonal distance: 13.6mm
Distance across flat: 12mm
Total height: 18mm
Cylinder part height: 12mm
Out diameter of cylinder part: 11mm
Description:
* Total weight: 67g
* Gear Motor:
* Operating voltage: 3V ~ 12V DC (recommended value is 6 ~ 8V)
* Maximum torque: 800g.cm (3V)
* Speed without load: 170RMP (3V)
* Reduction ratio: 1:48
* Load current: 70mA (250mA MAX) (3V pm)
* With EMC, it has strong anti-interference ability and causes no interference to micro-controller.
* Center hole: 5.3MM x 3.66MM
* Diameter: 66MM
* Width: 2.66MM
