1.100% Brand new and high quality
2.Adopt imported controller PL2303HX,which can stabilize the flash with high speed
3.500mA self recovery fuse for protection
4.Two data transmission indicator can monitor data transfer status in real time
5.Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
6.Electrostatic package,insures the board will not be damaged before use
7.Support WIN7,Win8,Vista,XP system
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Specification:
* Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
* GPRS multi-slot class 10/8
* GPRS mobile station class B
* Compliant to GSM phase 2/2+
* Class 4 (2 W 850 / 900 MHz)
* Class 1 (1 W 1800 / 1900MHz)
Features:
1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
2. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
5. Built-in 2.4Ghz antenna
6. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
7. Built-in voltage regulator
8. Standard DIP Pitch Interface for embedded applications
9. size: 34mm X 17mm X 1mmPackage Included:
1 xArduino NRF24L01+ 2.4GHz Wireless Transceiver Module
Featueres:
* Center Frequency:900/1800/2100MHz
* Band Width:10MHz
* Impendence:50
* Polarization:RHCP
* Gain :3DBI
* DC Voltage :3-5V
* DC current :7-10MA
* Max power:5W
* Weight :45g
* Cable :RG174 3m
* Working Temp :-40-100
Parameters:
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the for Arduino board Promini download!
The HC-05 bluetooth module can be set as a transmitter or receiver. You can combine this bluetooth module with your system: MCU, ARM or DSP systems, SOC systems.This module can build a connection to other modules in two ways: as a master or as a slave. Ex, a robot can be designed to be a master connected to a slave bluetooth module or as a slave board to make a wireless connection with a PC.
Audio Input: Wireless Bluetooth
Max. Receiving Distance: 10 Meter
Power Output: Dual-channel 15 W+15 W
Applicable Speaker Impedance: 4/6/8/10 ohm
Supply Voltage: DC 10~25 V(recommended DC 12V More than 2A)
Specifications
Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: =4dBm
Sensitivity: =-84dBm at 0.1% BER
Transmission Rate: 6 kbps (asynchronous & synchronous)
Security Feature: Authentication and encryption
