This module is only USB serial port module, is responsible for converting the USB interface into the ESP8266 module serial port. WiFi knowledge of all aspects of the query module ESP8266 related information!!
This adapter is mainly used to facilitate the ESP8266 through the serial port connection PC.
Material characteristics:
1 using CH340 serial chip, stable performance, good compatibility, Windows system basically all support.
2 switching board integrated 1000uF solid state capacitors, to ensure that the current supply, not because of the power supply problem makes the WIFI module crash no response.
3 the 3225 crystal, enhance the stability of serial port, but also beautiful tall.
This version is optimized in the original version to ensure consistent and compatible with the original, but also easy to use
Compatible with win7 and win8
This is a terminal adapter for the for arduino Nano.
It lables for arduino Nano version 3.0,
however you can still use this adapter for the older version
(just have to remember that A0-A7 are in the reverse order).
You can use this adapter to easily hook up for arduino Nano to an outside world via hook up wires.
Board Size:5.2x3.5cm(approx)
Technical details:
Nano V3 form-factor,
ATmega168 (16Mhz) microcontroller,
CH340G - USB-UART interface,
Input voltage 6-12V,
Output voltage 5V/800mA, 3.3V/180mA (Only in NEW vesrion),
MicroUSB - connection socket,
500mA resetable Fuse on USB port
01. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
02. Power your developement in the fastest way combinating with NodeMCU Firmware!
03. USB-TTL included, plug&play
04. 10 GPIO, every GPIO can be PWM, I2C, 1-wire
05. FCC CERTIFIED WI-FI module(Coming soon)
06. PCB antenna
The Mega 2560 is an update for the Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
CH340G replace the Atmega 8U2/16U2
CH340G Driver Download link, please copy the link and paste in browser: http://www.5v.ru/ch340g.htm
Microcontroller:ATmega2560
Clock Speed:16 MHz
EEPROM:4 KB
SRAM:8 KB
Flash Memory:256 KB of which 8 KB used by bootloader
Operating Voltage:5V
Input Voltage (recommended):7-12V
Analog Input Pins:16
Digital I/O Pins:54 (of which 14 provide PWM output)
AREF Output: 3.3V
Expand all 6 PWM pins
Expans I2C pins
Compatible only with Arduino NANO
Expand DC power interface
Available pins: +3.3V, +5V, GND, I2C, RX/TX, All other IOs
Programmable with on-board USB port and the free Arduino IDE
Great for wearables, textile projects - combine with any LilyPad sensor, power supply and LEDs
Only 25mm in diameter!
8K Byte of In-System Programmable Program Memory Flash,
512 Bytes In-System Programmable EEPROM /512 Bytes SRAM
ATmega168 running at 16MHz with external resonator
USB connection off board
Supports auto-reset
Max 150mA output
Over current protected
Reverse polarity protected
DC input 5V up to 12V
On board Power and Status LEDs
Size:(Long)33mm *(wide1)18 mm *(high)6mm
Package Content
1PCS Arduino pro min atmega168p board
3PCS Gilded Pin