Voltage range: DC 3.3V to 7.5V
Voltage range: DC 0 to 2.5V
Error: Voltage <± 1% Current <± 2%
Full-scale pressure drop: 200mV (when measuring current)
Resolution: voltage 10mV current 10mA
Operating temperature: 0-60 °C
The voltage and current tester uses a new generation of four and a half double integral loop conversion IC, with a precision bandgap reference source, range accuracy, high precision, stable, reliable performance, anti-interference ability, high temperature. USB interface, mobile phone charger, U disk and other products, power supply or power consumption. Cost-effective. This product can measure the USB power supply equipment empty, the load voltage, USB terminal equipment work voltage and current. Current and voltage cycle display, easy to use and practical. Compact and easy to carry, no need to connect another power supply. Voltage and current turns display, cycle time is 5S
the use of solid state relays, output with a resistive fuse 240V 2A.
Size: 55 * 33 * 25 (L * W * H)
input power: 5V DC (160MA)
the input control signal voltage:
(0-1.5V state low level relay ON)
(2.5-5V state high level relay OFF)
blue KF301 terminal access control line more convenient
1 single module can drive the an 8 * 8 dot matrix common cathode
2 the module Operating voltage: 5 v
The Module 3 dimensions: length 3.2 cm X 3.2 cm wide X 1.3 cm high
4 holes with four screws, the diameter of 3 mm
1. Immersion Gold PCB, machine welding process to ensure quality.
2. Name: HMC5883L module (three-axis magnetic field module).
3. Use the chip: HMC5883L.
4. Power supply :3-5v.
5. Communication modes: standard IIC communication protocol.
6. Measuring range: ± 1.3-8 Gauss.
Range of Receiving Frequency - 1575.42MHz
Band Width(MHz) - 10MHZ
Gain (Zenith)(dBi typ) - 0dB
Gain(10°elevation) -5dB
Polarization - Right-Handed Circular
Impedance(O) - 50%O
Product parameters:
* H bridge motor dual drive, and can drive two DC motor or 1 line 4 phase stepper motor;
* The voltage of the power supply module 2V-10V;
* The signal input voltage 1.8-7V;
* Single channel current of 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA);
