This version is optimized in the original version to ensure consistent and compatible with the original, but also easy to use
Compatible with win7 and win8
Increase the pin socket, to facilitate the use of DuPont line
Replaced 16u2 By CH340
Digital I / O Digital Inputs/ Outputs: 0-13
Analog I / O Analog Input/ Output: 0-5
Support ISP download function
The Input Voltage: no external power supply when connected to the computer USB, external power supply: 5V-9V DC
Output Voltage: 3.3V and 5V DC voltage output
Using Atmel Atmega328 micro controller
Board Size: Approx. 7.2 x 5.3 x 1.5cm / 2.83 x 2.09 x 0.59 inch
Features:
Name: electronic compass atmospheric pressure module (three-axis magnetic field + pressure)
Model: GY-652
The use of chip: HMC5983 + BMP180
Power supply :3-5v (internal low dropout regulator)
Communication modes: standard IIC communication protocol)
Programmable with on-board USB port and the free Arduino IDE
Great for wearables, textile projects - combine with any LilyPad sensor, power supply and LEDs
Only 25mm in diameter!
8K Byte of In-System Programmable Program Memory Flash,
512 Bytes In-System Programmable EEPROM /512 Bytes SRAM
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
This module is only USB serial port module, is responsible for converting the USB interface into the ESP8266 module serial port. WiFi knowledge of all aspects of the query module ESP8266 related information!!
