Temperature Controller DC 12V W1209 LED Digital Thermostat Thermometer Switch Module Waterproof
LKR 490.00
Temperature range :-30-110 °
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
Control accuracy: 0.1 °
Hysteresis accuracy: 0.1°
Refresh rate: 0.5S
High temperature protection: 0-110°
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ° ,Humidity 20% -85%
How to use:
Connect the power supply and the load, you can supply to the controller,
Is displayed as a measured temperature,
Press the SET button, the display flashes the temperature,
Press – to set the desired temperature,
After setting press SET to confirm return,
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:
Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.
These black plastic wheels are designed specifically for use with our FEETECH FS90R Servo. The wheels have silicone tires and measure 60 mm (2.36?) in diameter.Four additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.
Description:
1, 2 channels of logic and high voltage low voltage logic two-way transformation
2, 2 channels of high voltage logic into logic low voltage unidirectional conversion
3, small module, 1.5 cm X 1.5 cm
4, module compatible with bread plate, can be used directly put on the bread board
Features:
* High gloss 3K twill finish
* More strength, light weight, High efficient self-locking carbon fiber propeller,
* High hardness and elastic deformation is very small, which can increase the flexibility of the aircraft,stable connection, easy to install, good for each blade.
1. Designed for Raspberry Pi 2 and also compatible with the original Raspberry Pi B+
2. Color - and transperent, please choose which color you want
3. Material - ABS
4. Dimensions - 3.54 in x 2.36 in x 0.98 in (9 cm x 6 cm x 2.5 cm)
5. Weight - 30 g
