Signal input: single ended, pulse / direction
Subdivision optional: 1/2/4/8/16/32 subdivision
Output current: 0.5A-4.0A
Input voltage: 9-42VDC ( Optimal： 12-30VDC )
The current is automatically halved at rest.
TB6600 Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor
Optocoupler isolated signal input, strong anti-interference ability,
With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions
Small size, easy to install
External signal 3.3-24V universal, no series resistor required
Operating Temperature: -10 to 45 Degrees Celsius
Storage temperature: -40 to 70 Degrees Celsius
Chopping Frequency: less than 50KHZ
The TB6600 upgrade driver is a professional two-phase hybrid stepper motor driver that can be adapted at home and abroad. Various brands, currents of 4.0A and below, four-wire, six-wire, eight-wire, two-phase hybrid with an outer diameter of 39(Nema16), 42(Nema17), 57(Nema23)mm Stepper motors are suitable for a variety of small and medium-sized automation equipment and instruments, such as: engraving machines, marking machines, cutting machines, Laser phototypesetting, plotter, CNC machine tool, pick and place device, etc. In the user expects low cost, high current operation
Material: brass
Inner diameter: 2/4/5/6/7mm
Hexagon side length: 7mm
Diagonal distance: 13.6mm
Distance across flat: 12mm
Total height: 18mm
Cylinder part height: 12mm
Out diameter of cylinder part: 11mm
Size: 20*15*25
Axial length: 8 mm
Trunnion:2 mm
Reference current: 0.35 to 0.4 A
3 v speed: 17000-18000 revolutions per minute
This is a general motor suitable for small toy car, using 3V DC voltage.
Description:
* Total weight: 67g
* Gear Motor:
* Operating voltage: 3V ~ 12V DC (recommended value is 6 ~ 8V)
* Maximum torque: 800g.cm (3V)
* Speed without load: 170RMP (3V)
* Reduction ratio: 1:48
* Load current: 70mA (250mA MAX) (3V pm)
* With EMC, it has strong anti-interference ability and causes no interference to micro-controller.
* Center hole: 5.3MM x 3.66MM
* Diameter: 66MM
* Width: 2.66MM
Power supply voltage: VM = 15V max, VCC = 2.7\u20135.5V
Output current: Iout = 1.2A(average) / 3.2A (peak)
Standby control to save power
CW / CCW / short brake / stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply lines
Pre-soldered headers
