I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Sold out
Back to products
Next product
Ultrasonic Module
LKR 210.00
Step Stepper Motor Nema17
LKR 1,990.00
1.Step Angle 1.8°
2.Number of phase 2
3.Inductance resistance 100MΩmin(500V)
4.Rotor inertia 38g.cm2
5.Mass 0.2kg
6.Rated Voltage 12.8V
7.Rated Current 0.4A
8.Resistance per phase 32Ω±10%
9.Inductance per phase 37mH±20%
10.Holding Torque 220mN.m
11.Number of Lead wire 4
12Weight 150g/pc
13.Model Number 42SHD0503-20v2
14.Length 26mm
2.Number of phase 2
3.Inductance resistance 100MΩmin(500V)
4.Rotor inertia 38g.cm2
5.Mass 0.2kg
6.Rated Voltage 12.8V
7.Rated Current 0.4A
8.Resistance per phase 32Ω±10%
9.Inductance per phase 37mH±20%
10.Holding Torque 220mN.m
11.Number of Lead wire 4
12Weight 150g/pc
13.Model Number 42SHD0503-20v2
14.Length 26mm
Out of stock
SKU: S004
Category: Moters
Additional information
Brand | Louis Poulsen |
---|
Shipping & Delivery
TERM OF SHIPPING
For minimum of Rs 1500 orders are delivered with Free. Other orders are charged delivery charge by delivery partners
Shipping Available
- DOMEX
- Sri Lanka Post
Related products
Gear Motor 12GA 6V 300RPM
LKR 840.00
Specification:
Rated Voltage: DC 3V
Voltage Range: DC 1.5V-5V
Speed: 150RPM
Rated Voltage: DC 6V
Shaft Coupling 4mm
LKR 240.00
Material: brass
Inner diameter: 2/4/5/6/7mm
Hexagon side length: 7mm
Diagonal distance: 13.6mm
Distance across flat: 12mm
Total height: 18mm
Cylinder part height: 12mm
Out diameter of cylinder part: 11mm
Servo motor SG90
LKR 490.00
SG90 is the most popular 9g servo in the world, SG90 digital servo is the new version of SG90 analogue servo.
Servo Motor FS90R 360 Degree
LKR 840.00
Specifications:
Dimensions:23.2 × 12.5 × 22 mm
Weight:9 g
Operating Speed :
110RPM (4.8V)
130RPM (6V)
Stall Torque :
1.3kg.cm/18.09oz.in(4.8V)
1.5kg.cm/20.86oz.in(6V)
Operating Voltage: 4.8V~6V
Control System: Analog
DC Gear Motor GW25 -370 12V RPM250
LKR 1,590.00
Description:
Operating voltage: between 6 V and 18 V
Nominal voltage: 12 V
DC Gear Motor GW25 -370 12V RPM 82
LKR 1,590.00
Description:
Operating voltage: between 6 V and 18 V
Nominal voltage: 12 V
Shaft Coupling 5mm
LKR 240.00
Material: brass
Inner diameter: 2/4/5/6/7mm
Hexagon side length: 7mm
Diagonal distance: 13.6mm
Distance across flat: 12mm
Total height: 18mm
Cylinder part height: 12mm
Out diameter of cylinder part: 11mm
Motor Driver Stepper A4988 Module for CNC Shield
LKR 280.00
Low RDS (On) Output
Automatic current decay mode detection / selection
Mix with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Cross-current protection
3.3 and 5 V compatible logic supply
Thermal shutdown circuitry
Ground fault protection
Load short-circuit protection
Optional step five modes: full, 1/2, 1/4, 1/8 and 1/16