It is made of iron plated tip and stainless steel, ensures the quality of the products and the properties of the stability and reliability. Adjustable temperature controlled soldering irons: 200-450 degrees centigrade, you can adjust the temperature according to your need by the knob wheel on the Electronic Soldering Iron
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
1. The current sensor chips: ACS712ELC-05B.
2. pin 5V power supply, on-board power indicator.
3. the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / A.
4. there is no the detection current through, the output voltage is VCC / 2.
5. PCB board size: 31 (mm) x13 (mm).
Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!
Specifications:
Chip: MAX31855
Working Voltage: 3~3.6V
Temperature Measuring Range: -200°C to 1350°C
Temperature Resolution: 0.25°C
Output Mode: SPI Digital Signal
Module Size: 25mm * 15mm
Module Weight: 3g
Product description
1.PCB Board Dimension:3.2cmX1.4cm
2.Voltage:3.3V~5V
3.The output in the form: digital switching outputs (0 and 1) and analog AO voltage output
4.The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
