Color: black ink
Material: polysilicon
Role: outdoor power generation
Maximum output voltage: DC 5.5V ( under strong light)
Maximum output current: 50mA (under strong light)
Maximum power: 0.27W
Product Size: 9 * 3 * 0.2cm
1. The current sensor chips: ACS712ELC-05B.
2. pin 5V power supply, on-board power indicator.
3. the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / A.
4. there is no the detection current through, the output voltage is VCC / 2.
5. PCB board size: 31 (mm) x13 (mm).
Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!
Module Features:
Use imported groove coupler sensor
Groove Width: 5mm
Output state indicator lights
Obscured output high; unobstructed output low
The comparator output, the signal is clean, the waveform, driving ability, more than 15mA
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
Product description
1.PCB Board Dimension:3.2cmX1.4cm
2.Voltage:3.3V~5V
3.The output in the form: digital switching outputs (0 and 1) and analog AO voltage output
4.The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA
Characteristic parameter:
Mounting way: Screen shield type
Detection distance: 10mm±10%
Set distance: 0-8mm
Response frequency: 1 kHz
Delay distance: 10% below of the detection distance
Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
Features:
Name: electronic compass atmospheric pressure module (three-axis magnetic field + pressure)
Model: GY-652
The use of chip: HMC5983 + BMP180
Power supply :3-5v (internal low dropout regulator)
Communication modes: standard IIC communication protocol)
