I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Module stereo output, built-in Bluetooth antenna structure is simple, the power supply voltage is 3.7V~5V version selection, active speakers increase Bluetooth connection function. 7PIN output interface is spacing 2.54 through hole, 7PIN output interface is: + power, ground, left channel, right channel, mute, LED status indicator, reserved port.
Specifications
Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: =4dBm
Sensitivity: =-84dBm at 0.1% BER
Transmission Rate: 6 kbps (asynchronous & synchronous)
Security Feature: Authentication and encryption
Audio Input: Wireless Bluetooth
Max. Receiving Distance: 10 Meter
Power Output: Dual-channel 15 W+15 W
Applicable Speaker Impedance: 4/6/8/10 ohm
Supply Voltage: DC 10~25 V(recommended DC 12V More than 2A)
primary info
penetrating ability SI4432 IC, stable performance
Frequency Range: 433.92M
Sensitivity up to-121dBm
Maximum output power: 20dBm
Data transfer rate :0.123-256kbps
FSK, GFSK and OOK modulation mode
1.8-3.6 V power supply
Low consumption shutdown mode
Digital received signal strength indicator (RSSI)
Timing wake-up function
The antenna automatically match and two-way switch control
Features:
Remote Control:
Working Volt: DC12V
Frequency: 315MHz
Encoding Type: Fixed code
Shock Resistance: 4.7M
Firing Range: 100meter
Size: Approx. 3.5cm x 5.8cm x 1.3cm/ 1.38" x 2.28" x 0.51"
Features:
1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
2. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
5. Built-in 2.4Ghz antenna
6. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
7. Built-in voltage regulator
8. Standard DIP Pitch Interface for embedded applications
9. size: 34mm X 17mm X 1mm
Package Included:
1 xArduino NRF24L01+ 2.4GHz Wireless Transceiver Module
1. 3v-5v voltage available
2. Type: GY-GPS6MV2
3. With ceramic antenna, the signal is strong
4. EEPROM save configuration parameter data when power supply drop
5. Data backup battery
6. LED signal lights
7. Default baud rate: 9600
Specification
1.Works with standard (dual 5/3.3V) and 3.3V-only (for example, Arduino Pro)boards.
2.Operates over the extended -40°C to +85°C temperature range
3.Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral,
4.Full-/Low-Speed 12Mbps/1.5Mbps Host)