Specifications:
Remote Control:
1. Working Volt: DC 12V
2. Frequency: 315MHz
3. Encoding Type: Learning Code
4. Firing Range: 100 meters
5. Size: 53 x 42mm x 26mm
6. Shock resistance : 4.7m
Control Switch System:
1. Operating Voltage: DC 12V
2. Operating Frequency: 315MHz, 433.92MHz
3. Receiver Sensitivity: >-105dB
4. Maximum Load: 10A 240V AC /10A 24V DC
5. Encoding Type: learning code
6. Size: 34 x 31 x 18mm
Features:
1. High quality and practical design.
2. 2-line control system, which means you can control the working condition of
2 lines at the same time with this small remote control switch.
3. The firing range is up to 100 meters without interference.
4. Easy to install and operate.
5. Safe and reliable.
6. Applicable to wireless control of garage door, lighting, window curtain, equipment and appliance and more.
7. It will bring much more convenience for you in your work and daily life.
Instructions:
Jog: press one button is ON. Loosen your finger on the same button is OFF
Self -lock: press one button for one time is ON .press the same button again is OFF
Inter-lock: press one button is ON, press another button is OFF. (Need one channel switch and 2 buttons remote control)
Learning and remove method
1. Press the first learning code, the indicator flash, loosen your finger, press first button
of the remote control ,the indicator flash 2 times and off; press the second learning code,
the indicator flash, loosen your finger , press second button of the remote control ,
the indicator flash 2 times and offit mean you learn it successfully.
2. Remove/clean: press the learning button about 8 seconds, the indicator turn on to off,
it means the information that you keep have been removed successfully
Featueres:
* Center Frequency:900/1800/2100MHz
* Band Width:10MHz
* Impendence:50
* Polarization:RHCP
* Gain :3DBI
* DC Voltage :3-5V
* DC current :7-10MA
* Max power:5W
* Weight :45g
* Cable :RG174 3m
* Working Temp :-40-100
Features:
Real time location tracking, track playback.
Support SMS and GPRS platform tracking.
Built-in vibration senor, the realization of vehicle vibration alarm.
Micro letter management platform, free control.
Mobile client support android, apple system remote control.
Parameters:
PCB Dimensions: 26.5* 15.6mm
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
With self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader
With reset signal output, etc. directly to the for Arduino board Promini download!
Module stereo output, built-in Bluetooth antenna structure is simple, the power supply voltage is 3.7V~5V version selection, active speakers increase Bluetooth connection function. 7PIN output interface is spacing 2.54 through hole, 7PIN output interface is: + power, ground, left channel, right channel, mute, LED status indicator, reserved port.
Use the Mini key chain Universal Remote to control up to 500 brands of Televisions.
This item is easy to program and works within a few seconds.
Simply point and hold the mute button to program.
Color: Black
1. 3v-5v voltage available
2. Type: GY-GPS6MV2
3. With ceramic antenna, the signal is strong
4. EEPROM save configuration parameter data when power supply drop
5. Data backup battery
6. LED signal lights
7. Default baud rate: 9600