Description
5V 4-Channel Relay interface board
Optical isolation on each channel
Drive directly from Arduino etc.
High power relays for each channel: 250V 10A AC
Indication LED for each output
Module size: 70 x 53 x 20mm
Description
5V 4-Channel Relay interface board
Optical isolation on each channel
Drive directly from Arduino etc.
High power relays for each channel: 250V 10A AC
Indication LED for each output
Module size: 70 x 53 x 20mm
Discription:
01. Working voltage:4.5-30V DC
02. Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning
03. Working current:≤20mA
04. Display: 0.28" Two color blue and red
05. Measuring range: DC 0-100V 0-10A
06. Minimum resolution (V): 0.1V
input voltage: DC 3 V to 6 V
Input current: 2 A - 5 AHigh pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Charge module- Linear charging.
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging blue is full charged.
Input interface- mini USB.
Work temperature- -10 to +85.
Inversed polarity- NO.
Specification:
1. This item is a 5V 8-Channel Relay interface board,It can be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM and so on.
2. 8-Channel Relay interface board.
3. Each one needs 15-20mA Driver Current.
4. Equiped with high-current relay : DC30V 10A AC250V 10A.
5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
Size: 24*32*21mm/0.94*1.25*0.82”
Input Power: 5V DC (160mA)
Input control signal voltage:
(0-2.5V state low relay OFF)
(3-5V state high relay ON)
