Input Inrush Current: 20A
temperature protection
over current protection and short circuit protection
AC 85 ~ 265v wide voltage input
output isolation from industrial-grade
stable performance
input voltage: DC 3 V to 6 V
Input current: 2 A - 5 AHigh pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Discription:
01. Working voltage:4.5-30V DC
02. Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning
03. Working current:≤20mA
04. Display: 0.28" Two color blue and red
05. Measuring range: DC 0-100V 0-10A
06. Minimum resolution (V): 0.1V
Description
* on-board AMS1117-3.3 chip
* the input voltage range of 4.75V-12V
* on-board power indicator light, indicate power is turned
* board size: 18.5 (mm) x10.5 (mm)
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
01. Input: DC 6V - 12V (input voltage to output voltage must be greater than 1V or more.)
02. Output: 5.0V (+-0.05v error), 800mA (load current must not exceed 800ma)
03. pairs of panel design, layout, nice;
04. specially designed two pin mounting holes, can be directly fixed on the hole expansion board for experiments;
05. Input Output Using 2P single row pin header for easy connection;
06. PCB board size: 2.5cm * 1.1cm
07. with power indicator light (red)
Power Supply : 110~250Vac (self-powered)
Voltage Range : 110V~250V
Current Range : 0.01~20A /100A
Resolution : 1V, 0.01A, 0.01W, 0.01kWh
Display Type : LCD
Dimensions : 84mm*46mm*26mm
Specification:
1. This item is a 5V 8-Channel Relay interface board,It can be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM and so on.
2. 8-Channel Relay interface board.
3. Each one needs 15-20mA Driver Current.
4. Equiped with high-current relay : DC30V 10A AC250V 10A.
5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
Size: 24*32*21mm/0.94*1.25*0.82”
Input Power: 5V DC (160mA)
Input control signal voltage:
(0-2.5V state low relay OFF)
(3-5V state high relay ON)
