The module of the IN+ and – after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage
1). The input voltage should not exceed the maximum input voltage
2). The peak current output current is no more than TV university
Input and output voltage can display alternately
The starting state can be set freely.
This modlue has the function of controling the start-up and shutdown by the button. So it can control easily the state of output
This module have the big power MOS to protect the circuite in case of connecting reversely. This can improve the effiency and reliablity.
Description
* on-board AMS1117-3.3 chip
* the input voltage range of 4.75V-12V
* on-board power indicator light, indicate power is turned
* board size: 18.5 (mm) x10.5 (mm)
Charge module- Linear charging.
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging blue is full charged.
Input interface- mini USB.
Work temperature- -10 to +85.
Inversed polarity- NO.
01. Input: DC 6V - 12V (input voltage to output voltage must be greater than 1V or more.)
02. Output: 5.0V (+-0.05v error), 800mA (load current must not exceed 800ma)
03. pairs of panel design, layout, nice;
04. specially designed two pin mounting holes, can be directly fixed on the hole expansion board for experiments;
05. Input Output Using 2P single row pin header for easy connection;
06. PCB board size: 2.5cm * 1.1cm
07. with power indicator light (red)
5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
Size: 24*32*21mm/0.94*1.25*0.82”
Input Power: 5V DC (160mA)
Input control signal voltage:
(0-2.5V state low relay OFF)
(3-5V state high relay ON)
