I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Characteristic parameter:Mounting way: Screen shield type
Detection distance: 10mm±10%
Set distance: 0-8mm
Response frequency: 1 kHz
Delay distance: 10% below of the detection distance
Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plasticElectrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cmSize:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
1. The current sensor chips: ACS712ELC-05B.
2. pin 5V power supply, on-board power indicator.
3. the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / A.
4. there is no the detection current through, the output voltage is VCC / 2.
5. PCB board size: 31 (mm) x13 (mm).
Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!
1.Working Voltage : 5V(DC)
2.Static current: Less than 2mA.
3.Output signal: Electric frequency signal, high level 5V, low level 0V.
4.Sensor angle: Not more than 15 degrees.
5.Detection distance: 2cm-450cm.
6.High precision: Up to 0.3cm
7.Input trigger signal: 10us TTL impulse
8.Echo signal : output TTL PWL signal
