01. Working Voltage Range: DC 4.5V- 20V
02. Current drain:<60uA
03. Voltage Output: High/Low level signal:3.3V TTL output
04. Detection distance: 3–7M(can be adjusted)
05. Detection range: <140°
06. Delay time: 5-200S(can be adjusted, default 5s +-3%)
07. Blockade time: 2.5 S (default)
08. Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
09. Work temperature:-20-+80°C
10. Trigger Method: L unrepeatable trigger / H repeatable trigger
11. Color: White + Green
12. Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
13. Infrared sensor with control circuit board
14. The sensitivity and holding time can be adjusted
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Features :
The probe the temperature sensor DS18B20 original chip
High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
Stainless steel shell (6 mm), lead X 32 length 100 cm
3.0 V to 5.5 V power supply
Temperature range wide-55 Degree + 125 Degree
No other components, unique single bus interface
Output lead: red (VCCS), blue, black (is) (GND)
Module features:
Test reflection distance: 1mm to 25mm
The working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Has a fixed bolt hole, convenient installation
Small board PCB size: 3.2cm x 1.4cm
The LM393, use of wide voltage comparator
Size:3.1x1.3cm(approx)
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
Features:
* Low power consumption
* Power supply for 2 ~ 5.5V DC
* Can replace the traditional touch of a button
* Four M2 screws positioning holes for easy installation
1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plastic
Electrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cm
Size:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm
Product description
1.PCB Board Dimension:3.2cmX1.4cm
2.Voltage:3.3V~5V
3.The output in the form: digital switching outputs (0 and 1) and analog AO voltage output
4.The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA
Specifications:
Chip: MAX31855
Working Voltage: 3~3.6V
Temperature Measuring Range: -200°C to 1350°C
Temperature Resolution: 0.25°C
Output Mode: SPI Digital Signal
Module Size: 25mm * 15mm
Module Weight: 3g
