Multi-function Shield has the following characteristics:
1. with the market , 2009 UNO LENARDO 2560 controller seamlessly mainstream
2. 4 -way LED indicator ( LED indicator to know the importance , in the actual doing projects , with this indicator can be used directly working status LED indicates the procedure to facilitate debugging.
3. DS18B20 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include the DS18B20 Oh, needed another shot .
4. LM35 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include LM35 Oh, needed another shot .
5. 3296 precision adjustable potentiometer, analog input port ( can be used for controlling LED brightness, turn the steering angle , the digital voltage, etc. )
6. integrated infrared receiver that can fit any infrared remote control experiments , the price also does not include the integrated receiver and needed another shot .
7. four digital tube ( using 74HC595 driver provincial IO learning SPI), you can do digital display experiment ( can display temperature , voltage, counter value , etc. ) .
8. three separate buttons, a reset button , the button can do experiments ( HMI ) .
9. the buzzer sound can be used for experiments . ( Can call the police , pronunciation , etc. )
10. Bluetooth, wireless interfaces, voice module , voice recognition module can be used for wireless communication experiment
11. servo interface, easy to drive servos
12. infrred detection interface, easy and infrared docking realization of human traffic statistics , etc.
ATmega168 running at 16MHz with external resonator
USB connection off board
Supports auto-reset
Max 150mA output
Over current protected
Reverse polarity protected
DC input 5V up to 12V
On board Power and Status LEDs
Size:(Long)33mm *(wide1)18 mm *(high)6mm
Package Content
1PCS Arduino pro min atmega168p board
3PCS Gilded Pin
Microcontroller:ATmega32u4
Operating Voltage:5V
Input Voltage (recommended):7-12V
Input Voltage (limits):6-20V
Digital I/O Pins:20
PWM Channels:7
Analog Input Channels:12
DC Current per I/O Pin:40 mA
DC Current for 3.3V Pin:50 mA
Flash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM:2.5 KB (ATmega32u4)
EEPROM:1 KB (ATmega32u4)
Clock Speed:16 MHz
Length: 68.6 mm
Width: 53.3 mm
Weight: about 20g
Programmable with on-board USB port and the free Arduino IDE
Great for wearables, textile projects - combine with any LilyPad sensor, power supply and LEDs
Only 25mm in diameter!
8K Byte of In-System Programmable Program Memory Flash,
512 Bytes In-System Programmable EEPROM /512 Bytes SRAM
01. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
02. Power your developement in the fastest way combinating with NodeMCU Firmware!
03. USB-TTL included, plug&play
04. 10 GPIO, every GPIO can be PWM, I2C, 1-wire
05. FCC CERTIFIED WI-FI module(Coming soon)
06. PCB antenna
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS