01. Working Voltage Range: DC 4.5V- 20V
02. Current drain:<60uA
03. Voltage Output: High/Low level signal:3.3V TTL output
04. Detection distance: 3--7M(can be adjusted)
05. Detection range: <140°
06. Delay time: 5-200S(can be adjusted, default 5s +-3%)
07. Blockade time: 2.5 S (default)
08. Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
09. Work temperature:-20-+80°C
10. Trigger Method: L unrepeatable trigger / H repeatable trigger
11. Color: White + Green
12. Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
13. Infrared sensor with control circuit board
14. The sensitivity and holding time can be adjusted
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
Features:
Name: electronic compass atmospheric pressure module (three-axis magnetic field + pressure)
Model: GY-652
The use of chip: HMC5983 + BMP180
Power supply :3-5v (internal low dropout regulator)
Communication modes: standard IIC communication protocol)
Characteristic parameter:
Mounting way: Screen shield type
Detection distance: 10mm±10%
Set distance: 0-8mm
Response frequency: 1 kHz
Delay distance: 10% below of the detection distance
Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plastic
Electrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cm
Size:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm