Featueres:
* Center Frequency:900/1800/2100MHz
* Band Width:10MHz
* Impendence:50
* Polarization:RHCP
* Gain :3DBI
* DC Voltage :3-5V
* DC current :7-10MA
* Max power:5W
* Weight :45g
* Cable :RG174 3m
* Working Temp :-40-100
Features:
1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
2. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
5. Built-in 2.4Ghz antenna
6. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
7. Built-in voltage regulator
8. Standard DIP Pitch Interface for embedded applications
9. size: 34mm X 17mm X 1mm
Package Included:
1 xArduino NRF24L01+ 2.4GHz Wireless Transceiver Module
Features:
Remote Control:
Working Volt: DC12V
Frequency: 315MHz
Encoding Type: Fixed code
Shock Resistance: 4.7M
Firing Range: 100meter
Size: Approx. 3.5cm x 5.8cm x 1.3cm/ 1.38" x 2.28" x 0.51"
The HC-05 bluetooth module can be set as a transmitter or receiver. You can combine this bluetooth module with your system: MCU, ARM or DSP systems, SOC systems.
This module can build a connection to other modules in two ways: as a master or as a slave. Ex, a robot can be designed to be a master connected to a slave bluetooth module or as a slave board to make a wireless connection with a PC.
Module stereo output, built-in Bluetooth antenna structure is simple, the power supply voltage is 3.7V~5V version selection, active speakers increase Bluetooth connection function. 7PIN output interface is spacing 2.54 through hole, 7PIN output interface is: + power, ground, left channel, right channel, mute, LED status indicator, reserved port.
