1. 3v-5v voltage available
2. Type: GY-GPS6MV2
3. With ceramic antenna, the signal is strong
4. EEPROM save configuration parameter data when power supply drop
5. Data backup battery
6. LED signal lights
7. Default baud rate: 9600
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
01. 2 interface for 5V Servo connected to the for Arduino's high-resolution dedicated timer - no jitter!
02. Can drive 4 for DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional for DC motors with individual 8-bit speed selection
03. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
04. 4 H-Bridges: per bridge provides 0.6A (1.2A for peak current) with thermal for protection, can run motors on 4.5V to 36V for DC
Pull down resistors keep motors disabled during power-up
for Arduino reset button
05. 2 external terminal power interface, for seperate logic/motor supplies
06. compatible with for Arduino
Features:
Real time location tracking, track playback.
Support SMS and GPRS platform tracking.
Built-in vibration senor, the realization of vehicle vibration alarm.
Micro letter management platform, free control.
Mobile client support android, apple system remote control.
