Description
Heart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be difficult to measure. Luckily, the Pulse Sensor Amped can solve that problem!
1.Working Voltage : 5V(DC)
2.Static current: Less than 2mA.
3.Output signal: Electric frequency signal, high level 5V, low level 0V.
4.Sensor angle: Not more than 15 degrees.
5.Detection distance: 2cm-450cm.
6.High precision: Up to 0.3cm
7.Input trigger signal: 10us TTL impulse
8.Echo signal : output TTL PWL signal
Characteristic parameter:
Mounting way: Screen shield type
Detection distance: 10mm±10%
Set distance: 0-8mm
Response frequency: 1 kHz
Delay distance: 10% below of the detection distance
Detection object: Magnetic metal (the detection distance decrease when it is non-magnetic metal)
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
1. The current sensor chips: ACS712ELC-05B.
2. pin 5V power supply, on-board power indicator.
3. the module can be measured plus or minus 5 amps, corresponding to the analog output of 185 mV / A.
4. there is no the detection current through, the output voltage is VCC / 2.
5. PCB board size: 31 (mm) x13 (mm).
Note: ACS712 Hall detection principle, when you use to avoid magnetic field impact this!
Description:
* adjustable sensitivity ( shown in blue digital potentiometer adjustment )
* Operating Voltage 3.3V-5V
* Module Dual Output mode , a simple digital output , analog output more accurate.
* with fixed bolt hole for easy installation
* small PCB board size : 3cm * 1.6cm
* power indicator ( red ) and the digital switch output indicator ( green )
