Module Features:
Use imported groove coupler sensor
Groove Width: 5mm
Output state indicator lights
Obscured output high; unobstructed output low
The comparator output, the signal is clean, the waveform, driving ability, more than 15mA
Module Features:
Use imported groove coupler sensor
Groove Width: 5mm
Output state indicator lights
Obscured output high; unobstructed output low
The comparator output, the signal is clean, the waveform, driving ability, more than 15mA
Operating Voltage: 3.3V-5V
The output in the form: Digital switching outputs (0 and 1)
A fixed bolt hole for easy installation
Small plates PCB Dimensions: 3.2 x 1.4cm / 1.25 * 0.55″
Using a wide voltage LM393 comparator
Module Using The Instructions:
Module slot unobstructed, receiver tube conduction module DO output low, shelter, DO output high
Module DO connected to the relay, composed of the limit switch functions can also be connected to the active buzzer module
01. Working Voltage Range: DC 4.5V- 20V
02. Current drain:<60uA
03. Voltage Output: High/Low level signal:3.3V TTL output
04. Detection distance: 3--7M(can be adjusted)
05. Detection range: <140°
06. Delay time: 5-200S(can be adjusted, default 5s +-3%)
07. Blockade time: 2.5 S (default)
08. Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
09. Work temperature:-20-+80°C
10. Trigger Method: L unrepeatable trigger / H repeatable trigger
11. Color: White + Green
12. Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
13. Infrared sensor with control circuit board
14. The sensitivity and holding time can be adjusted
Product description
1.PCB Board Dimension:3.2cmX1.4cm
2.Voltage:3.3V~5V
3.The output in the form: digital switching outputs (0 and 1) and analog AO voltage output
4.The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA
Specifications:
Chip: MAX31855
Working Voltage: 3~3.6V
Temperature Measuring Range: -200°C to 1350°C
Temperature Resolution: 0.25°C
Output Mode: SPI Digital Signal
Module Size: 25mm * 15mm
Module Weight: 3g
Description:
* adjustable sensitivity ( shown in blue digital potentiometer adjustment )
* Operating Voltage 3.3V-5V
* Module Dual Output mode , a simple digital output , analog output more accurate.
* with fixed bolt hole for easy installation
* small PCB board size : 3cm * 1.6cm
* power indicator ( red ) and the digital switch output indicator ( green )
1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plastic
Electrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cm
Size:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm
