The Mini POWER HUB has been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB.
The HUB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc.
Batteries may range from 3S to 6S LiPo.
The HUB also features convenient solder bridge of various voltage for camera & video TX.
2oz copper & 4-players PCB
BEC & Battery solder tabs in pairs
Solder Bridges of various voltage for Camera & VTX
5V & 12V Output LED indicators & Short circuit tolerant
Features:
* High gloss 3K twill finish
* More strength, light weight, High efficient self-locking carbon fiber propeller,
* High hardness and elastic deformation is very small, which can increase the flexibility of the aircraft,stable connection, easy to install, good for each blade.
- All GPS data available via the I2C bus to connect to 328P Multiwii FC
- A LED on board show GPS 3D Fix status
- ATMega 328P Microcontroller
- 2 Molex 1.25mm 4Pin socket for GPS receiver and FC
- 2 port for ISP and FTDI
- Dimension: 26 x 20 x 5mm
- Weight: 2.4g/6.3g (include cable)
- Hole diameter: 3.1mm
Features:
Capable of maximum continuous discharge rates up to 35C, placing this battery among the most powerful Li-Po battery packs in its class
Product type: Rechargeable lithium polymer battery
Battery parameter: Zop Power 11.1V 2200mAh 30C 3S Battery
Battery capacity: 2200MAh
Continuous discharge rate: 30C
Battery size:108x26x34mm (L X W X H)
Battery weight: 172g
CE Approval
