Model: GY – 511
Size: 14.5 mm * 20.5 mm
Name: LSM303DLHC module (triaxial magnetic field + triaxial acceleration)
Use chip: LSM303DLHC
Power supply: 3-5v (internal low voltage differential regulator)
Communication mode: standard IIC communication protocol
Magnetic field range: ±1.3 /± 1.9 /± 2.5 /± 4.0 /± 4.7 / 5.6 mm / 8.1 mm gauss
Acceleration range: ±2 g/±4 g/±8 g
The chip is equipped with 12bit AD converter and 16-bit data output
Using high quality submerged gold PCB, machine welding technology to ensure quality
Module stereo output, built-in Bluetooth antenna structure is simple, the power supply voltage is 3.7V~5V version selection, active speakers increase Bluetooth connection function. 7PIN output interface is spacing 2.54 through hole, 7PIN output interface is: + power, ground, left channel, right channel, mute, LED status indicator, reserved port.
the use of solid state relays, output with a resistive fuse 240V 2A.
Size: 55 * 33 * 25 (L * W * H)
input power: 5V DC (160MA)
the input control signal voltage:
(0-1.5V state low level relay ON)
(2.5-5V state high level relay OFF)
blue KF301 terminal access control line more convenient
the use of solid state relays, output with a resistive fuse 240V 2A.
Size: 55 * 33 * 25 (L * W * H)
input power: 5V DC (160MA)
the input control signal voltage:
(0-1.5V state low level relay ON)
(2.5-5V state high level relay OFF)
blue KF301 terminal access control line more convenient
1. Size:37mmx25cmx32mm/1.45''x0.98''x1.26''
2. Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables.
WIDE SUPPLY RANGE: 2.0V to 5.5V
LOW CURRENT CONSUMPTION: Continuous Mode: Only 150A Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Product parameters:
* H bridge motor dual drive, and can drive two DC motor or 1 line 4 phase stepper motor;
* The voltage of the power supply module 2V-10V;
* The signal input voltage 1.8-7V;
* Single channel current of 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA);
Range of Receiving Frequency - 1575.42MHz
Band Width(MHz) - 10MHZ
Gain (Zenith)(dBi typ) - 0dB
Gain(10°elevation) -5dB
Polarization - Right-Handed Circular
Impedance(O) - 50%O