Specification:
Chip: TCS230
Input voltage: DC 3V-5V
Output frequency voltage: 0 ~ 5V
Use bright white LED lights
can be connected directly with Microcontroller
Static detection of the measured object color
Best detection distance: 1cm
Specification:
Chip: TCS230
Input voltage: DC 3V-5V
Output frequency voltage: 0 ~ 5V
Use bright white LED lights
can be connected directly with Microcontroller
Static detection of the measured object color
Best detection distance: 1cm
1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plastic
Electrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cm
Size:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm
Module Features:
Use imported groove coupler sensor
Groove Width: 5mm
Output state indicator lights
Obscured output high; unobstructed output low
The comparator output, the signal is clean, the waveform, driving ability, more than 15mA
Features :
The probe the temperature sensor DS18B20 original chip
High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
Stainless steel shell (6 mm), lead X 32 length 100 cm
3.0 V to 5.5 V power supply
Temperature range wide-55 Degree + 125 Degree
No other components, unique single bus interface
Output lead: red (VCCS), blue, black (is) (GND)
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
