01. This charger can charge 2/4/6/8 pcs AA/AAA Ni-MH/Ni-Cd rechargeable batteries.
02. Timer controls the charging process.Insure using safety.
03. LED in luminous when charging ,will turn off when batteries are fully charged .
04. The constant current and voltage will prolong battery life.
Specification:
Input: 100-240V 50/60Hz
Output: 2.4V DC 600mA
AA 150mA * 2 (or 4, 6, 8)
AAA 100mA * 2 (or 4, 6, 8)
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
01, on-board precision miniature voltage transformer
02, on-board high-precision op amp circuit, the signal to do accurate sampling and appropriate compensation function
03, the module can measure less than 250V AC voltage, corresponding toExportAnalog can be adjusted
04, PCB board size: 49.5 (mm) x19.4 (mm)
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
1. 3v-5v voltage available
2. Type: GY-GPS6MV2
3. With ceramic antenna, the signal is strong
4. EEPROM save configuration parameter data when power supply drop
5. Data backup battery
6. LED signal lights
7. Default baud rate: 9600
Round Red Momentary Push Button, Single Pole Single Throw.
Designed to control the movement of a mechanical part.
Typically utilized in industrial control applications to automatically monitor and indicate whether the travel limits of a particular device have been exceeded.
High precision mechanism design offering acute operation and long life.
