Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
Specifications
Separate analog, digital, and IO power supply
Serial data and control interface (SPI)
1 headphone and audio output interface
1 microphone for recording, support audio encoding format
1 line input interface; supports MP3 and WAV stream
Features:
Name: electronic compass atmospheric pressure module (three-axis magnetic field + pressure)
Model: GY-652
The use of chip: HMC5983 + BMP180
Power supply :3-5v (internal low dropout regulator)
Communication modes: standard IIC communication protocol)
These black plastic wheels are designed specifically for use with our FEETECH FS90R Servo. The wheels have silicone tires and measure 60 mm (2.36?) in diameter.Four additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.
01. 2 interface for 5V Servo connected to the for Arduino's high-resolution dedicated timer - no jitter!
02. Can drive 4 for DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional for DC motors with individual 8-bit speed selection
03. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
04. 4 H-Bridges: per bridge provides 0.6A (1.2A for peak current) with thermal for protection, can run motors on 4.5V to 36V for DC
Pull down resistors keep motors disabled during power-up
for Arduino reset button
05. 2 external terminal power interface, for seperate logic/motor supplies
06. compatible with for Arduino
