01. Support CAN V2.0B specification, the communication speed 1Mb / S 0 to 8-byte data field
02. Three frames – standard, expand the frame and remote
DC5V power supply module & SPI interface protocol control
120 ohm termination resistors, Impedance matching, ensure drive capacity, long-distance data transmission against signal radiation
03. Module dimensions 4. 4 x 2.8 cm/1.57*1.1″ (approx.)
04. Working Current – typ. 5mA & 1μA standby current
05. Working Temperature – (Industrial grade) -40°C – +85°C
Features:
1.100% Brand new and high quality
2.Adopt imported controller PL2303HX,which can stabilize the flash with high speed
3.500mA self recovery fuse for protection
4.Two data transmission indicator can monitor data transfer status in real time
5.Reserve 3.3V and 5V pin interface,easy for the DDWRT of different voltage system that need power
6.Electrostatic package,insures the board will not be damaged before use
7.Support WIN7,Win8,Vista,XP system
Package Included:
1 x PL2303HX module
1. 3v-5v voltage available
2. Type: GY-GPS6MV2
3. With ceramic antenna, the signal is strong
4. EEPROM save configuration parameter data when power supply drop
5. Data backup battery
6. LED signal lights
7. Default baud rate: 9600
Specification:
USB to serial converters, including CDC ACM, Prolific PL2303 and FTDI FT232
Google ADK v.1
PTP with Canon EOS and Powershot extensions, as well as Nikon DSLR cameras
Features:
* 802.11 b / g / n
* Wi-Fi Direct (P2P), soft-AP
* Built-in TCP / IP protocol stack
* Built-in TR switch, balun, LNA, power amplifier and matching network
* Built-in PLL, voltage regulator and power management components
* 802.11b mode + 19.5dBm output power
* Built-in temperature sensor
* Support antenna diversity
* off leakage current is less than 10uA
Features:
Real time location tracking, track playback.
Support SMS and GPRS platform tracking.
Built-in vibration senor, the realization of vehicle vibration alarm.
Micro letter management platform, free control.
Mobile client support android, apple system remote control.
Features:
1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
2. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs
3. Built-in hardware CRC error detection, Multipoint communication address control.
4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
5. Built-in 2.4Ghz antenna
6. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
7. Built-in voltage regulator
8. Standard DIP Pitch Interface for embedded applications
9. size: 34mm X 17mm X 1mm
Package Included:
1 xArduino NRF24L01+ 2.4GHz Wireless Transceiver Module
