Specification:
Power supply: 3 V to 5 V
Communication: I2C or SPI
Pressure accuracy: ± 1 hPa
Temperature Accuracy: ± 1.0 ° C
Dimensions: 19.2mm x 17.9mm x 2.9mm / 0.8 “x 0.7″ x 0.1 ”
Weight: 1.3 g.
Specification:
Power supply: 3 V to 5 V
Communication: I2C or SPI
Pressure accuracy: ± 1 hPa
Temperature Accuracy: ± 1.0 ° C
Dimensions: 19.2mm x 17.9mm x 2.9mm / 0.8 “x 0.7″ x 0.1 ”
Weight: 1.3 g.
1. Can detect surrounding environment of the humidity and temperature
2. DHT11 sensor adopts
3. Humidity measurement range: 20% ~95%
4. Humidity measurement error: ±5%
5. Temperature measurement range: 0℃~50℃
6. Temperature measurement error: ±2 ℃
7. Operating voltage:3.3 V~5 V
8. Output form:digital
9. Has fixed bolt hole and easy installation
10. PCB Dimension: 32 mm * 14 mm
Specifications
Dimensions: 2.95" x 0.5" x 0.125" (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 analog voltages
Output voltage range: 0 V to supplied voltage
Optimal sensing distance: 0.125" (3 mm)
Maximum recommended sensing distance: 0.25" (6 mm)
Weight without header pins: 0.11 oz (3.09 g)
01. Working Voltage Range: DC 4.5V- 20V
02. Current drain:<60uA
03. Voltage Output: High/Low level signal:3.3V TTL output
04. Detection distance: 3--7M(can be adjusted)
05. Detection range: <140°
06. Delay time: 5-200S(can be adjusted, default 5s +-3%)
07. Blockade time: 2.5 S (default)
08. Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
09. Work temperature:-20-+80°C
10. Trigger Method: L unrepeatable trigger / H repeatable trigger
11. Color: White + Green
12. Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
13. Infrared sensor with control circuit board
14. The sensitivity and holding time can be adjusted
Features :
The probe the temperature sensor DS18B20 original chip
High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
Stainless steel shell (6 mm), lead X 32 length 100 cm
3.0 V to 5.5 V power supply
Temperature range wide-55 Degree + 125 Degree
No other components, unique single bus interface
Output lead: red (VCCS), blue, black (is) (GND)
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
