Specifications
Separate analog, digital, and IO power supply
Serial data and control interface (SPI)
1 headphone and audio output interface
1 microphone for recording, support audio encoding format
1 line input interface; supports MP3 and WAV stream
Specifications
Separate analog, digital, and IO power supply
Serial data and control interface (SPI)
1 headphone and audio output interface
1 microphone for recording, support audio encoding format
1 line input interface; supports MP3 and WAV stream
Power indicator light
On-board 3.3 V and 2.5 V LDO chip AMS-1117, maximum current of 800 mA
Single Power Supply: +5 VDC, capacitor filter
12.288 MHz crystal
01, on-board precision miniature voltage transformer
02, on-board high-precision op amp circuit, the signal to do accurate sampling and appropriate compensation function
03, the module can measure less than 250V AC voltage, corresponding toExportAnalog can be adjusted
04, PCB board size: 49.5 (mm) x19.4 (mm)
01. 2 interface for 5V Servo connected to the for Arduino's high-resolution dedicated timer - no jitter!
02. Can drive 4 for DC motors or 2 stepper motors or 2 Servo
Up to 4 bi-directional for DC motors with individual 8-bit speed selection
03. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
04. 4 H-Bridges: per bridge provides 0.6A (1.2A for peak current) with thermal for protection, can run motors on 4.5V to 36V for DC
Pull down resistors keep motors disabled during power-up
for Arduino reset button
05. 2 external terminal power interface, for seperate logic/motor supplies
06. compatible with for Arduino
01. The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
02. Power your developement in the fastest way combinating with NodeMCU Firmware!
03. USB-TTL included, plug&play
04. 10 GPIO, every GPIO can be PWM, I2C, 1-wire
05. FCC CERTIFIED WI-FI module(Coming soon)
06. PCB antenna
Feature:
The Standard 2.4Ghz 3-Channel Receiver for RC car and boat.
Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind.
Channels: 3 channels
Model type: Car/Boat
Modulation: GFSK
Code type: PPM
Frequency: 2.4G
Certificate: CE FCC
01. This charger can charge 2/4/6/8 pcs AA/AAA Ni-MH/Ni-Cd rechargeable batteries.
02. Timer controls the charging process.Insure using safety.
03. LED in luminous when charging ,will turn off when batteries are fully charged .
04. The constant current and voltage will prolong battery life.
Specification:
Input: 100-240V 50/60Hz
Output: 2.4V DC 600mA
AA 150mA * 2 (or 4, 6, 8)
AAA 100mA * 2 (or 4, 6, 8)
These black plastic wheels are designed specifically for use with our FEETECH FS90R Servo. The wheels have silicone tires and measure 60 mm (2.36?) in diameter.Four additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.
Features:
1.Low voltage, low power device, and with automatic power off switch.
2.3 wire interface can meet the various communication with the microprocessor.
3.Compared with MS5534A, the pressure range of the pressure drop (10 mbar) is improved.
