The Arduino Compatible LilyPad is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega328 with the Arduino bootloader. The main board has a minimum number of external components to keep it as small (and as simple) as possible. The latest version supports automatic reset for even easier programming. The back side of the LilyPad is completely flat. It uses a surface mount programming connector, which keep the header from poking through.
Features:
Name: electronic compass atmospheric pressure module (three-axis magnetic field + pressure)
Model: GY-652
The use of chip: HMC5983 + BMP180
Power supply :3-5v (internal low dropout regulator)
Communication modes: standard IIC communication protocol)
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
Features:
Real time location tracking, track playback.
Support SMS and GPRS platform tracking.
Built-in vibration senor, the realization of vehicle vibration alarm.
Micro letter management platform, free control.
Mobile client support android, apple system remote control.
CPU: Broadcom BCM2835, which can run at up to 1GHz.
RAM: 512MB
Power: 5V, supplied via micro USB connector, drawing 160mA (even when connected to an HD display).
Dimensions: 65mm x 30mm x 5mm
Video & Audio: 1080P HD video output. Audio output via mini-HDMI connector.
Storage: MicroSD card.
Operating System: Linux, installed via NOOBS.
The Mega 2560 is an update for the Arduino Mega, which it replaces.
The board is a microcontroller board based on the ATmega2560-16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
CH340G replace the Atmega 8U2/16U2
CH340G Driver Download link, please copy the link and paste in browser: http://www.5v.ru/ch340g.htm
Microcontroller:ATmega2560
Clock Speed:16 MHz
EEPROM:4 KB
SRAM:8 KB
Flash Memory:256 KB of which 8 KB used by bootloader
Operating Voltage:5V
Input Voltage (recommended):7-12V
Analog Input Pins:16
Digital I/O Pins:54 (of which 14 provide PWM output)
