1. the output current DC/SCR/relay Control output: 100 ma / 5 v power supply
2. current DC < 25 ma
3. the response time < 2 ms
4. the pointing Angle: 15 ° or less, adjustable range 3-50 cm5,
5. test object: transparent or not transparent body
6. working environment temperature 25 ~ + 55
7. standard detection objects: the light from the sun under 10000 lx under incandescent light bulb 3000 lx
8. shell material: plastic
Electrical properties:
U: 5 V
I: 100 ma
Sn: 3-50 cm
Size:
17 mm diameter
The sensor length: 45mm
Lead length: 45 cm
Features :
The probe the temperature sensor DS18B20 original chip
High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
Stainless steel shell (6 mm), lead X 32 length 100 cm
3.0 V to 5.5 V power supply
Temperature range wide-55 Degree + 125 Degree
No other components, unique single bus interface
Output lead: red (VCCS), blue, black (is) (GND)
1. Can detect surrounding environment of the humidity and temperature
2. DHT11 sensor adopts
3. Humidity measurement range: 20% ~95%
4. Humidity measurement error: ±5%Â
5. Temperature measurement range: 0℃~50℃
6. Temperature measurement error: ±2 ℃
7. Operating voltage:3.3 V~5 V
8. Output form:digital
9. Has fixed bolt hole and easy installation
10. PCB Dimension: 32 mm * 14 mm
1.Working Voltage : 5V(DC)
2.Static current: Less than 2mA.
3.Output signal: Electric frequency signal, high level 5V, low level 0V.
4.Sensor angle: Not more than 15 degrees.
5.Detection distance: 2cm-450cm.
6.High precision: Up to 0.3cm
7.Input trigger signal: 10us TTL impulse
8.Echo signal : output TTL PWL signal
Feature summary
Operating voltage: 4.5 V to 5.5 V
Average current consumption: 30 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 10 cm to 80 cm (4? to 32?)
Output type: analog voltage
Module features:
Test reflection distance: 1mm to 25mm
The working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Has a fixed bolt hole, convenient installation
Small board PCB size: 3.2cm x 1.4cm
The LM393, use of wide voltage comparator
Size:3.1x1.3cm(approx)
