Showing 25–32 of 32 results

Show sidebar

Stepper Motor Driver DRV8825

LKR 390.00
the maximum current of 2.5A. the maximum support 32 subdivision. 4 layer PCB board, better heat dissipation. the chip resistance is smaller, lower heat, better heat dissipation.

Stepper Motor Driver TB6600

LKR 2,100.00
Signal input: single ended, pulse / direction Subdivision optional: 1/2/4/8/16/32 subdivision Output current: 0.5A-4.0A Input voltage: 9-42VDC ( Optimal: 12-30VDC ) The current is automatically halved at rest. TB6600 Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor Optocoupler isolated signal input, strong anti-interference ability, With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions Small size, easy to install External signal 3.3-24V universal, no series resistor required Operating Temperature: -10 to 45 Degrees Celsius Storage temperature: -40 to 70 Degrees Celsius Chopping Frequency: less than 50KHZ

Stepper Motor Nema23 23HS5628

LKR 3,990.00
Step angle accuracy: + - 5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy: + - 20%

Water Pump DC

LKR 1,020.00
Features: 1. Brushless, permanent magnetic rotor. 2. Super long working life(more than 30000 hours). 3. Adopt high performance ceramic shaft. 4. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems. 5. Amphibious design. 6. Submersible installation and entirely waterproof.

Water Pump Submersible 200LH 1.8M 

LKR 1,390.00
Description: 100% Brand New Size: 43.6mm(height)*26mm(diameter) Water Outlet Outer Diameter: 7.79mm Water Outlet Inner Diameter: 5.0mm Rated Voltage: 6V-12V

Wheel for FS90R Servo 60x8mm

LKR 590.00
These black plastic wheels are designed specifically for use with our FEETECH FS90R Servo. The wheels have silicone tires and measure 60 mm (2.36?) in diameter.Four additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.

Wheel with Geared Motor

LKR 280.00
Description: * Total weight: 67g * Gear Motor: * Operating voltage: 3V ~ 12V DC (recommended value is 6 ~ 8V) * Maximum torque: 800g.cm (3V) * Speed without load: 170RMP (3V) * Reduction ratio: 1:48 * Load current: 70mA (250mA MAX) (3V pm) * With EMC, it has strong anti-interference ability and causes no interference to micro-controller. * Center hole: 5.3MM x 3.66MM * Diameter: 66MM * Width: 2.66MM