Showing 37–42 of 42 results

Show sidebar

Video Transmitter Wireless FPV 5.8G 600mW 48Ch

LKR 2,190.00
Video format supported: NTSC/PAL Antenna connection: RP-SMA, jack Power input: 7-24V (3S Lipoly suggested) Transmitting power: 600mW Antenna gain: 2dbm Working current: 310mA at 12V Video bandwidth: 8Mhz Audio bandwidth : 6.5Mhz Weight: 7g(without antenna) Dimension: 23x 25x 7.7mm(excluding antenna)

WiFi to usb adapter

LKR 490.00
WiFi Wireless 802.11 n/g/b 150M Mini USB Hi-Speed interface LAN Adapter Network Card Wholesale price

Wifi Wireless Module(ESP 12)

LKR 540.00
Features: * 802.11 b / g / n * Wi-Fi Direct (P2P), soft-AP * Built-in TCP / IP protocol stack * Built-in TR switch, balun, LNA, power amplifier and matching network * Built-in PLL, voltage regulator and power management components * 802.11b mode + 19.5dBm output power * Built-in temperature sensor * Support antenna diversity * off leakage current is less than 10uA

wireless module SI4432 433.92Mhz

LKR 640.00
primary infopenetrating ability SI4432 IC, stable performanceFrequency Range: 433.92M Sensitivity up to-121dBmMaximum output power: 20dBm Data transfer rate :0.123-256kbps FSK, GFSK and OOK modulation mode 1.8-3.6 V power supply Low consumption shutdown mode Digital received signal strength indicator (RSSI) Timing wake-up function The antenna automatically match and two-way switch control

Wireless Tranciever NRF 21L01+ Antena

LKR 540.00
Specifications :
* Voltage: 3-3.6V (recommended 3.3V) V
* Maximum output power: +20dBm
* Emission mode current(peak): 115Ma
* Receive Mode Current(peak): 45Ma
* Power-down mode current: 4.2Ua
* Sensitivity 2Mbps mode in received: -92dBm
* Sensitivity 1Mbps mode in received: -95dBm
* Sensitivity 250kbps mode in received: -104dBm
* PA gain: 20Db

Wireless Transceiver NRF24L01

LKR 210.00
Features: 1. Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 2. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs 3. Built-in hardware CRC error detection, Multipoint communication address control. 4. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode 5. Built-in 2.4Ghz antenna 6. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. 7. Built-in voltage regulator 8. Standard DIP Pitch Interface for embedded applications 9. size: 34mm X 17mm X 1mmPackage Included: 1 xArduino NRF24L01+ 2.4GHz Wireless Transceiver Module