2G 3G IPEX antenna Connector type: ipx13 In the definition of Bobbi: S.W.R <= 1.8 Gain definition: 3dBi (*Typical*) Frequency band definition: 1710~2170MHz 800~960 Impedance definition: 50 ohm Total length: as shown in Figure Electrical Characteristics A. S.W.R. 3 @ MHz & 880~960 <=2.5 @ MHz 1710~1800 Impedance 50 Ohm
Specifications Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: =4dBm Sensitivity: =-84dBm at 0.1% BER Transmission Rate: 6 kbps (asynchronous & synchronous) Security Feature: Authentication and encryption
USB powered Universal Micro USB 5V power supply 3.7-5V Supply Pad External 3.7-5V lithium battery power conversion LED indicator Bluetooth mode long blue light 3.5mm stereo audio interface Standard 3.5mm interface, output stereo sound source, plug in headphones, connect amplifiers and other devices
Module stereo output, built-in Bluetooth antenna structure is simple, the power supply voltage is 3.7V~5V version selection, active speakers increase Bluetooth connection function. 7PIN output interface is spacing 2.54 through hole, 7PIN output interface is: + power, ground, left channel, right channel, mute, LED status indicator, reserved port.
Audio Input: Wireless Bluetooth Max. Receiving Distance: 10 Meter Power Output: Dual-channel 15 W+15 W Applicable Speaker Impedance: 4/6/8/10 ohm Supply Voltage: DC 10~25 V(recommended DC 12V More than 2A)
Bluetooth 3.0 +EDR, class 2 Support s A2DP stereo profile and HFP profile Support DSP, Auto pairing. 3.5mm stereo inlet socket Transmission Distance: 10m Work Time: 8 hours Color: Black Item size: 5.5 * 2.5 * 1.0cm / 2.17 * 0.98 * 0.39in Item weight: 15g Package size: 11.0 * 7.5 * 2.0cm / 4.33 * 2.95 * 0.79in
The HC-05 bluetooth module can be set as a transmitter or receiver. You can combine this bluetooth module with your system: MCU, ARM or DSP systems, SOC systems. This module can build a connection to other modules in two ways: as a master or as a slave. Ex, a robot can be designed to be a master connected to a slave bluetooth module or as a slave board to make a wireless connection with a PC.
Description With this Ethernet Shield, your Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. Controller: W5100. This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online. It is directly supported by Arduino official Ethernet Library.
- All GPS data available via the I2C bus to connect to 328P Multiwii FC - A LED on board show GPS 3D Fix status - ATMega 328P Microcontroller - 2 Molex 1.25mm 4Pin socket for GPS receiver and FC - 2 port for ISP and FTDI - Dimension: 26 x 20 x 5mm - Weight: 2.4g/6.3g (include cable) - Hole diameter: 3.1mm