with professionals
with pi zero
Gps active antenna 6x20x6mm
Range of Receiving Frequency - 1575.42MHz
Band Width(MHz) - 10MHZ
Gain (Zenith)(dBi typ) - 0dB
Gain(10°elevation) -5dB
Polarization - Right-Handed Circular
Impedance(O) - 50%O
VGA to HDMI Adapter
Input: VGA Male
Output: HDMI Female
Color: White
Audio cable length 48cm
Intermediate interval: 13.5cm
USB cable length: 1 meter
Material: ABS
Motor driver Shield VNH2SP30
Description
16 v Voltage Max:
Maximum current rating: 30 A
Practical Continuous Current: 14 A
The Current sensing available analog pin
MOSFET on - hold: 19 m Ω (per legs)
Maximum PWM frequency: 20 kHz
Thermal Shutdown
Undervoltage and Overvoltage shutdown
LilyPad ATTINY85
Programmable with on-board USB port and the free Arduino IDE
Great for wearables, textile projects - combine with any LilyPad sensor, power supply and LEDs
Only 25mm in diameter!
8K Byte of In-System Programmable Program Memory Flash,
512 Bytes In-System Programmable EEPROM /512 Bytes SRAM
Caster wheel
Specifications
Wheel Type : White Nylon, Dual roller bearing
Material: White Nylon PP Material And Steel
Load bearing: 10kg (each)
GPS – I2C Navigation Adapter
- All GPS data available via the I2C bus to connect to 328P Multiwii FC
- A LED on board show GPS 3D Fix status
- ATMega 328P Microcontroller
- 2 Molex 1.25mm 4Pin socket for GPS receiver and FC
- 2 port for ISP and FTDI
- Dimension: 26 x 20 x 5mm
- Weight: 2.4g/6.3g (include cable)
- Hole diameter: 3.1mm
Membrane Switch Keypad 3×4
Specifications:
4 x 3 Matrix Membrane Keypad
7 pin connector
F3 EVO Brushed Flight Controller
Specifiations:
Dimension: 22mm*32.5mm
Thickness: 1.2mm
Weight: 3g
Breadboard Power Supply Module 3.3V 5V MB-102
Specification
* Locking ON / OFF Switch
* LED Power Indicator
* Input Voltage: 6.5 V to 12 V (DC)
* Output Voltage: 3.3 V / 5 V
* Maximum Output Current: 700 mA
* Power Rails 0 V, 3.3 V, 5 V on Breadboard
* Two Groups of Header Pins * Size: 5.3 cm в 3.5 cm
දැන් Arduinoshop.lk ඔබේ අතේ දුරට.
6MB පමණයි.
FEATURED
18650 1200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
18650 3200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1800mAh
Weight 44g
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
AC Digital Amp Volt Meter 100A 300V
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
NEW ARRIVALS
ඔබගේ video Tutorials / තාක්ෂණික ලිපි මෙහි පළකර ගැනීමට අපවෙත යොමු කරන්න
තාක්ෂණික ලිපි කියවන්න
November 29, 2019
ICT – A/L Micro-controller Development Systems ක්ෂුද්ර- සකසන සංවර්ධන පද්ධති කොටස – 01
Micro-controllers and micro-processors ක්ෂුද්ර-පාලක සහ ක්ෂුද්ර-සකසන සාමන්ය පුද්ගල පරිගනකයක් සැලකූවිට එය ප්රධාන කොටස් කිපයකින් සමන්විත බව අපි දන්නවා එවා නම්
October 17, 2019
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 03
අපි දැන් සංවර්ධිත පුවරුව පරිගනකය හා සම්බන්ද කිරීම, ක්රමලේකනය හා කෙතය උඩුගත කිරිම සම්බන්දයෙන් සලකා බලමු. Arduino Uno / Mega සංවර්දිත
November 30, 2018
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 02
ක්රමලේකනය (program) කිරිමට සහ ක්රියත්මක විමට අවශ්ය මුලිකාංග ඇතුලත් කර සංවර්ධන පුවරු සහ සංවර්ධන පද්ධති නිර්මාණය කර ඇත. වඩාත් ප්රසිද්ධ
Brands
[contact-form-7 id=”7″]