
with professionals


with pi zero




Voltmeter & Ammeter DC
Discription:
01. Working voltage:4.5-30V DC
02. Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning
03. Working current:≤20mA
04. Display: 0.28" Two color blue and red
05. Measuring range: DC 0-100V 0-10A
06. Minimum resolution (V): 0.1V
Resistor
Carbon Film Resistor 0.125W 5%
Laser Distance module time of flight TOF VL53LOX
Working voltage: 3 ~ 5V
Communication method: IIC
Measurement of absolute distance: 2m
Xshutdown / GPIO (Interrupt)
size:25mm*10.7mm
Hole pitch:19.3mm
Solid State Relay Module 1 Channel G3MB-202P 240V 2A Output
5V Omron solid state relay 240V 2A, output with resistive fuse 240V 2A
Size: 24*32*21mm/0.94*1.25*0.82”
Input Power: 5V DC (160mA)
Input control signal voltage:
(0-2.5V state low relay OFF)
(3-5V state high relay ON)
Neodymium Magnet 5mm x 1mm
Operating temperature: =80°C .
Magnets Type: Neodymium.
Disc Size: 5mm x 1mm.
Rating: N35
Ethernet Shield W5100
Description
With this Ethernet Shield, your Arduino board can be used to connect to internet.
Can be used as server or client.
Directly plug puzzle board, no soldering required.
Controller: W5100.
This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
It is directly supported by Arduino official Ethernet Library.
Video Downlink OTG 5.8G 150CH Mini FPV Receiver
Specifications:
This is the newest version, add auto sweep and matc frequency,Graphical interface,Snow screen 0.1s Delay.
Output Signal: AV Analog Signal
Product size: approx. 160x30x10mm/6.29x1.18x0.39in
Net weight: approx. 25g
Display Module OLED Blue 0.96 128X64
The use of OLED technology offers the following advantages for flat-panel displays:
1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below)
2. Self-emitting light, in contrast to the required backlight for TFT-LCD
3. High luminosity
CAN Bus Module MCP2515
This is a brand new MCP2515 CAN bus module TJA1050 receiver SPI protocol
Compatible with Arduino based micro-controller projects.
FEATURED
18650 1200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
18650 3200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1800mAh
Weight 44g
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
AC Digital Amp Volt Meter 100A 300V
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
NEW ARRIVALS
ඔබගේ video Tutorials / තාක්ෂණික ලිපි මෙහි පළකර ගැනීමට අපවෙත යොමු කරන්න
Brands
[contact-form-7 id=”7″]