with professionals
with pi zero
Temperature Probe Waterproof DS18b20
Features :
The probe the temperature sensor DS18B20 original chip
High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
Stainless steel shell (6 mm), lead X 32 length 100 cm
3.0 V to 5.5 V power supply
Temperature range wide-55 Degree + 125 Degree
No other components, unique single bus interface
Output lead: red (VCCS), blue, black (is) (GND)
DC Gear Motor GW25 -370 12V RPM250
Description:
Operating voltage: between 6 V and 18 V
Nominal voltage: 12 V
DC Motor Drive Module 2 CHANNEL
Product parameters:
* H bridge motor dual drive, and can drive two DC motor or 1 line 4 phase stepper motor;
* The voltage of the power supply module 2V-10V;
* The signal input voltage 1.8-7V;
* Single channel current of 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA);
Thermistor 3950 NTC MF52 4.7K
1% accuracy
Thermistor NTC – MF52-103/3590 10 k 3950 ± 1%
Alcohol Ethanol Sensor MQ3
01. Type: Gas Sensor (Alcohol / Ethanol Detector)
02. Model: MQ-3
03. Operating Voltage: (DC) 3V - 5V.
04. Analog Output: 0V - 5V higher concentration results in higher voltage.
05. Digital Output: TTL output for microcontrollers.
06. PCB Size: 32mm x 22mm x 22mm
Glue Gun 20W
Handy and lightweight, comfortable to hold in hand.
Heats quickly (3-5mins), no waste of time.
Easy operation, 2 finger trigger, moves up and down in an arc better.
Wide application in handcraft and repair job.
Ultrasonic Sensor Holder long arm
Ultrasonic Sensor Mounting Bracket For HC-SR04 Smart Car Arduino
USB to ESP8266 WIFI module adapter
This module is only USB serial port module, is responsible for converting the USB interface into the ESP8266 module serial port. WiFi knowledge of all aspects of the query module ESP8266 related information!!
Power Supply Booster Converter XL6009 DC-DC Module
Input voltage: 3v-32v
Adjustable output: 5v-35v
Maximum output current: 3A
Efficiency: 94%
දැන් Arduinoshop.lk ඔබේ අතේ දුරට.
6MB පමණයි.
FEATURED
18650 1200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
18650 3200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1800mAh
Weight 44g
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
AC Digital Amp Volt Meter 100A 300V
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
NEW ARRIVALS
ඔබගේ video Tutorials / තාක්ෂණික ලිපි මෙහි පළකර ගැනීමට අපවෙත යොමු කරන්න
තාක්ෂණික ලිපි කියවන්න
November 29, 2019
ICT – A/L Micro-controller Development Systems ක්ෂුද්ර- සකසන සංවර්ධන පද්ධති කොටස – 01
Micro-controllers and micro-processors ක්ෂුද්ර-පාලක සහ ක්ෂුද්ර-සකසන සාමන්ය පුද්ගල පරිගනකයක් සැලකූවිට එය ප්රධාන කොටස් කිපයකින් සමන්විත බව අපි දන්නවා එවා නම්
October 17, 2019
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 03
අපි දැන් සංවර්ධිත පුවරුව පරිගනකය හා සම්බන්ද කිරීම, ක්රමලේකනය හා කෙතය උඩුගත කිරිම සම්බන්දයෙන් සලකා බලමු. Arduino Uno / Mega සංවර්දිත
November 30, 2018
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 02
ක්රමලේකනය (program) කිරිමට සහ ක්රියත්මක විමට අවශ්ය මුලිකාංග ඇතුලත් කර සංවර්ධන පුවරු සහ සංවර්ධන පද්ධති නිර්මාණය කර ඇත. වඩාත් ප්රසිද්ධ
Brands
[contact-form-7 id=”7″]