with professionals
with pi zero
Power Supply Boost Converter 150W DC-DC
DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage.
Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.
Boost charger. You can use the 12V power supply to charge battery more than 12V, for example, 24V batter
Joy Stick Module
1. Size:37mmx25cmx32mm/1.45''x0.98''x1.26''
2. Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables.
Arduino uno R3 ATMEGA16U2 + ATMEGA328P + Cable
Whole sell available for this item contact us.
1 Size :53.4mm * 75mm
2 master chip :ATMEGA328 Microcontroller / Secondary chip : ATMEGA16U
3 USBLine Power Supply:5v
4 external power supply:7-12v, Suggested 9v
5 digital inputs/Output pin14(Where6A support PWM)
6 analog input pins6Range
7 built-in flash :32 KB
8 SRAM:2k
9 EEPROM: 1K
10 Clock Frequency:16MH
11 Outer port :DC input,USB B square opening
GPS – I2C Navigation Adapter
- All GPS data available via the I2C bus to connect to 328P Multiwii FC
- A LED on board show GPS 3D Fix status
- ATMega 328P Microcontroller
- 2 Molex 1.25mm 4Pin socket for GPS receiver and FC
- 2 port for ISP and FTDI
- Dimension: 26 x 20 x 5mm
- Weight: 2.4g/6.3g (include cable)
- Hole diameter: 3.1mm
USBASP USBISP AVR Programmer
Features
Onboard ATMega8(L).
Onboard over-current protection.
Arduino LilyPad ATmega328 16M
Microcontroller: ATmega328P
Operating voltage: 2.7V ~ 5.5V (recommended 5V)
Input voltage: 2.7V ~ 5.5V (recommended 5V)
Digital I/O pins: 14 (of which 6 provide PWM output)
Analog input pins: 6
DC current per I/O pin: 40mA
Flash memory: 16KB (of which 2KB used by bootloader)
SRAM: 1KB
EEPROM: 512bytes
Clock speed: 16MHz
Servo motor MG995
Features Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc... Great for truck, Boat, Racing Car, Helicopter and Airplane. Power Supply: Through External Adapter. Stable and Shock Proof. - Coreless Motor - Metal Gear - Double Ball Bearing - Connector Wire Length 300mm
Flight Controller Naze 32 Rev6
Sensors: MPU6500
Height: 36mm
Width: 36mm
Weight: 6 grams (no headers, 8 grams with)
Version:6 DOF
Features:
Battery voltage monitoring
Built-in FrSky telemetry converter
Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz.
Onboard USB for setup and configuration
Soldering Iron 60W
60w/220v Soldering Iron
LED 4 Digit 7 Segment Red 0.56in.
4 bit Common Cathode Digital Tube 0.56" 0.56in. Red LED Digit 7 Segment
දැන් Arduinoshop.lk ඔබේ අතේ දුරට.
6MB පමණයි.
FEATURED
18650 1200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
18650 3200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1800mAh
Weight 44g
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
AC Digital Amp Volt Meter 100A 300V
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
NEW ARRIVALS
ඔබගේ video Tutorials / තාක්ෂණික ලිපි මෙහි පළකර ගැනීමට අපවෙත යොමු කරන්න
තාක්ෂණික ලිපි කියවන්න
November 29, 2019
ICT – A/L Micro-controller Development Systems ක්ෂුද්ර- සකසන සංවර්ධන පද්ධති කොටස – 01
Micro-controllers and micro-processors ක්ෂුද්ර-පාලක සහ ක්ෂුද්ර-සකසන සාමන්ය පුද්ගල පරිගනකයක් සැලකූවිට එය ප්රධාන කොටස් කිපයකින් සමන්විත බව අපි දන්නවා එවා නම්
October 17, 2019
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 03
අපි දැන් සංවර්ධිත පුවරුව පරිගනකය හා සම්බන්ද කිරීම, ක්රමලේකනය හා කෙතය උඩුගත කිරිම සම්බන්දයෙන් සලකා බලමු. Arduino Uno / Mega සංවර්දිත
November 30, 2018
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 02
ක්රමලේකනය (program) කිරිමට සහ ක්රියත්මක විමට අවශ්ය මුලිකාංග ඇතුලත් කර සංවර්ධන පුවරු සහ සංවර්ධන පද්ධති නිර්මාණය කර ඇත. වඩාත් ප්රසිද්ධ
Brands
[contact-form-7 id=”7″]