with professionals
with pi zero
LiPo 11.1V 2200mAh 30C battey
Features:
Capable of maximum continuous discharge rates up to 35C, placing this battery among the most powerful Li-Po battery packs in its class
Product type: Rechargeable lithium polymer battery
Battery parameter: Zop Power 11.1V 2200mAh 30C 3S Battery
Battery capacity: 2200MAh
Continuous discharge rate: 30C
Battery size:108x26x34mm (L X W X H)
Battery weight: 172g
CE Approval
PIR Sensor Module
01. Working Voltage Range: DC 4.5V- 20V
02. Current drain:<60uA
03. Voltage Output: High/Low level signal:3.3V TTL output
04. Detection distance: 3--7M(can be adjusted)
05. Detection range: <140°
06. Delay time: 5-200S(can be adjusted, default 5s +-3%)
07. Blockade time: 2.5 S (default)
08. Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
09. Work temperature:-20-+80°C
10. Trigger Method: L unrepeatable trigger / H repeatable trigger
11. Color: White + Green
12. Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
13. Infrared sensor with control circuit board
14. The sensitivity and holding time can be adjusted
Raspberry Pi Zero W
CPU: Broadcom BCM2835, which can run at up to 1GHz.
RAM: 512MB
Power: 5V, supplied via micro USB connector, drawing 160mA (even when connected to an HD display).
Dimensions: 65mm x 30mm x 5mm
Video & Audio: 1080P HD video output. Audio output via mini-HDMI connector.
Storage: MicroSD card.
Operating System: Linux, installed via NOOBS.
Pixle LED 12mm 1pcs
Working voltage: DC 5V
Power: 0.3W
Waterproof: IP68 Waterproof
Aluminum Heat Sink 20x20x15mm for raspberry pi
Specification:
Materials : Aluminum
Size : 20*20*15mm (L*W*H)
Color: Silver
L298N Motor Drive Module
Using L298N made by ST company as the control chip, the module has such characteristics as strong driving ability, low1.Double H bridge drive 2.Chip: L298N 3.Logical voltage: 5V 4.Drive voltage: 5V-35V 5.Logical current: 0mA-36mA 6.Drive current: 2A(MAX single bridge) 7.Max power: 25W 8.Size:43 x 43 x 26mm 9.Net weight: 26g Note: *This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply *DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. *When ENA enable IN1 IN2 control OUT1 OUT2 *When ENB enable IN3 IN4 control OUT3 OUT4 calorific value and strong anti-interference ability.
Uno R3 CH340G MEGA328P
This version is optimized in the original version to ensure consistent and compatible with the original, but also easy to use
Compatible with win7 and win8
Arduino Motor Drive L293D
01. 2 interface for 5V Servo connected to the for Arduino's high-resolution dedicated timer - no jitter! 02. Can drive 4 for DC motors or 2 stepper motors or 2 Servo Up to 4 bi-directional for DC motors with individual 8-bit speed selection 03. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. 04. 4 H-Bridges: per bridge provides 0.6A (1.2A for peak current) with thermal for protection, can run motors on 4.5V to 36V for DC Pull down resistors keep motors disabled during power-up for Arduino reset button 05. 2 external terminal power interface, for seperate logic/motor supplies 06. compatible with for Arduino
දැන් Arduinoshop.lk ඔබේ අතේ දුරට.
6MB පමණයි.
FEATURED
18650 1200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1200mAh
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
18650 3200mAh 3.7V Li-ion Rechargeable Battery
Nominal Voltage 3.7V
Charge Voltage 4.2V
Cut-off Voltage 2.75V
Capacity 1800mAh
Weight 44g
Diameter 18.4mm
Height 65.0mm
Temperature Charge: 0°C ~ 45°C
Discharge: -20°C ~ 60°C
Storage: -20°C ~ 30°C
Humidity: 65±20%
Cycle life >500 times
Standard charge current 0.5C
Fast charge current 1C
Max discharge current 1C
OEM customize wires/connector/solder tabs/battery packs
Packing traying packing or in small boxes
Certificate CE, ROHS, MSDS
AC Digital Amp Volt Meter 100A 300V
Features:
* Dual measurement of AC voltage, AC current with AC current transformer
* Voltage Measuring Range: AC 80 ~ 300V
* Current Measuring Range: AC 0.1 ~ 100A (Current in excess of 1A is recommended)
* Display backgroud color & Type: Blue & LCD
NEW ARRIVALS
ඔබගේ video Tutorials / තාක්ෂණික ලිපි මෙහි පළකර ගැනීමට අපවෙත යොමු කරන්න
තාක්ෂණික ලිපි කියවන්න
November 29, 2019
ICT – A/L Micro-controller Development Systems ක්ෂුද්ර- සකසන සංවර්ධන පද්ධති කොටස – 01
Micro-controllers and micro-processors ක්ෂුද්ර-පාලක සහ ක්ෂුද්ර-සකසන සාමන්ය පුද්ගල පරිගනකයක් සැලකූවිට එය ප්රධාන කොටස් කිපයකින් සමන්විත බව අපි දන්නවා එවා නම්
October 17, 2019
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 03
අපි දැන් සංවර්ධිත පුවරුව පරිගනකය හා සම්බන්ද කිරීම, ක්රමලේකනය හා කෙතය උඩුගත කිරිම සම්බන්දයෙන් සලකා බලමු. Arduino Uno / Mega සංවර්දිත
November 30, 2018
Micro-controller Development Systems ක්ෂුද්ර-සකසන සංවර්ධන පද්ධති කොටස – 02
ක්රමලේකනය (program) කිරිමට සහ ක්රියත්මක විමට අවශ්ය මුලිකාංග ඇතුලත් කර සංවර්ධන පුවරු සහ සංවර්ධන පද්ධති නිර්මාණය කර ඇත. වඩාත් ප්රසිද්ධ
Brands
[contact-form-7 id=”7″]